Link Panel Filters, Link Panel Filters, Need A HVAC Link Panel? Get the Perfect Fit for Your AC or Furnace, Link Panel

See Single Ring Panel Filters

Link Panel Filters


 Link Panel Air Filters
Step 1
Step 2

Select your Length:

  • *Length will vary depending on amount of links.
Step 3

Use (+) or (-) to select your Quantity

You have selected:

Panels(s):

Link(s):

0

0

$

Shipping and Storage Cost Reduction

Due to the reduced thickness of panel filters, less space is needed to transport and store filters. With only half the space required for panels compared to 2" filters, less trips are required to carry filters to the roof, and bulky boxes are eliminated.

Easy Installation Eliminates Air Bypass

Link panels are easy to install. When removing link panels, there is no need to "fish" each filter out with metal hooks or similar devices. The filters 1" - 2" media overlap allows it to fit snug into the track, and by using one filter per track, there is no air bypass.

Extended Life vs. Pleated Filters

Our 3 ply panel filters have 1.5 inches of media depth compared to tightly woven pleated media which allows dust to collect only on the surface, causing the filter to quickly clog up, thus reducing the life of the filter.

Tough Construction

The filter is supported by a heavy duty 9 gauge galvanized wire with two crossbars. The media is sealed around the wire using a strong heat sealed bond. The filter is 100% moisture-resistant, and will not deteriorate or warp in wet or humid environments.

BEFORE YOU BUY
Make sure to measure the entire filter track. The length and height of the panel filter will have a tolerance of +1" -2" between each panel.  What this means is your size will be up to 2" bigger between panels.  This tolerance is typical of all link panel filters, the material and construction of the link panel filters causes overlap. Panels can be folded and be pushed together giving your air handler a tighter seal.

NOTE
Length and Height sizes are interchangeable.
link panels require 4-5 business days to manufacture.
Link Panel Filters ARE NON-RETURNABLE, so make sure you enter the correct measurements before buying.

INSTRUCTIONS

  • Select your Height using the clickable choices.
  • All Link Panels have a depth of 1.5 inch.
  • The "Length" is dependant on your needs and/or application.
  • Select your length from the dropdown in Step 2
  • Select the number of panel filters you wish to purchase by using the [ + ] and [ - ] buttons.
  • You can increase or decrease your order by a quantity of 1, depending on how many you need.
  • After all selections are made the price will appear for you to view.
  • You can change your options, and the price will adjust accordingly.
  • When your all done, just "Add to Cart" to make your purchase.

Technical Specs and Additional Info:

Material: 100% Polyester, 9 gauge galvanized wire frame
Ply: 3
Nominal Depth: 1" to 4"
Actual Depth: 1½"
Made: Made in the USA
MERV rating: MERV 11
The easiest way to make sure you order the correct size is to measure your current air handler's track length and height with a tape measure. Make sure to measure the entire filter track. The length and height of the panel filter will have a tolerance of +1" -2" between each panel.  What this means is your size will be up to 2" bigger between panels.  This tolerance is typical of all link panel filters, given the material and construction of the link panel filters there is overlap. Panels can be folded and be pushed together giving your air handler a tighter seal.
Link Panels are custom made and require 5 business days to manufacture.
Link Panels are NON-RETURNABLE.   Make sure you enter the correct measurements before buying.
A single ring panel has a minimum size of 12" x 20" or a maximum of 25" x 25".
If a dimension exceeds the length of 25" the panel filter will be made of multiple links.
Prices shown are list prices, if you have any applicable discounts, the discounted price will be shown after you add the product to your cart.

Back to top